Klüber POLYLUB HVT 50 A Spray 400mL | Adhesive Lubricant | A081041

High-Viscosity Adhesive Lubricant for Gearwheels, Chains, Wire Ropes and Industrial Machinery

Supply Solutions Group supplies Klüber POLYLUB HVT 50 A Spray – 400mL – Article No. 081041 / A081041, a highly viscous, permanently elastic adhesive lubricant designed for gearwheels, chains, wire ropes and other demanding industrial lubrication applications.

POLYLUB HVT 50 A is formulated from mineral oil and solvents. Klüber specifies the lubricant for applications including open gears, drive chains, control chains, conveyor chains, steering racks, wire ropes and conveyor guide rails.

The product contains an anticorrosion additive, is manufactured without silicone-containing raw materials and provides noise-reducing properties.

Product Type

• Brand: Klüber Lubrication
• Product: POLYLUB HVT 50 A Spray
• Article Number: 081041
• Supplier Code: A081041
• Product Type: Adhesive Lubricant Spray
• Size: 400mL
• Base Oil: Mineral Oil
• Colour: Brown
• Density at 20°C: Approx. 0.94g/cm³
• Service Temperature: -10°C to +150°C
• Shear Viscosity at 40°C: 30,000–40,000 mPa·s
• Minimum Shelf Life: Approx. 24 months
• Silicone Raw Materials: None
• Anticorrosion Additive: Yes
• Container: Aerosol Spray Can.

Key Features

• Very viscous adhesive lubricant
• Permanently elastic lubrication film
• Mineral-oil based formulation
• Excellent adhesion to components
• Designed for gearwheels and chains
• Suitable for wire ropes
• Suitable for open gears
• Suitable for conveyor chains
• Suitable for control and drive chains
• Suitable for guide rails
• Contains anticorrosion additive
• Helps reduce operating noise
• No raw materials containing silicone
• Broad -10°C to +150°C service temperature
• Convenient 400mL aerosol application.

Technical Specifications

Klüber's product information confirms these technical values for article 081041.

Typical Applications

• Open gears
• Gearwheels
• Drive chains
• Control chains
• Conveyor chains
• Wire ropes
• Steering racks
• Conveyor guide rails
• Industrial machinery
• Material-handling equipment
• General industrial lubrication.

Suitable Industries

• Manufacturing
• Mining and resources
• Materials handling
• Engineering
• Industrial maintenance
• Warehousing
• Conveyor systems
• Machinery maintenance
• Production facilities
• Textile manufacturing
• Transport
• Heavy industry

Why Choose Klüber POLYLUB HVT 50 A?

POLYLUB HVT 50 A combines:

Strong Adhesion + High Viscosity + Permanent Elasticity + Corrosion Protection

The lubricant is designed to remain attached to components where a conventional low-viscosity lubricant may be less suitable, particularly on exposed gears, chains and similar moving components.

Application

Klüber recommends shaking the aerosol thoroughly before application. After spraying, allow approximately 15 minutes for the solvent to evaporate.

Because it is an aerosol lubricant containing solvents, keep it away from naked flames, incandescent materials and ignition sources, and follow the current product label and Safety Data Sheet.

Why Buy from Supply Solutions Group?

Supply Solutions Group supplies Klüber speciality lubricants, industrial aerosols, greases, oils and maintenance consumables to businesses throughout Australia.