LOCTITE® 609 Retaining Compound | 50mL | IDH 232100 | High Strength Low Viscosity Cylindrical Bonding | Business Delivery Available

High-Strength Anaerobic Retaining Compound for Bearings, Bushings, Sleeves, Shafts and Close-Fitting Cylindrical Metal Parts

Supply Solutions Group supplies LOCTITE® 609 Retaining Compound – 50mL (IDH 232100) to organisations operating across manufacturing, engineering, automotive, mining, transport, electric motor repair, maintenance and industrial workplaces throughout Australia.

LOCTITE 609 is a professional high-strength, low-viscosity retaining compound designed for bonding and retaining close-fitting cylindrical metal components.

The one-part formulation uses anaerobic cure technology, curing when confined in the absence of air between close-fitting metal surfaces.

LOCTITE 609 is particularly suitable for locking bushings and sleeves in housings and on shafts, augmenting press fits and bonding other close-fitting cylindrical components.

Once cured, the compound provides a high-strength, corrosion-free bond, helping maintain the integrity of cylindrical assemblies in demanding mechanical and industrial applications.

The product's low viscosity of approximately 120 mPa·s allows it to flow readily into close-fitting assemblies, making it particularly appropriate for components with narrow clearances.

Henkel specifies a gap-fill capability of up to 0.15mm, supporting its use across precision cylindrical assemblies where close tolerances are maintained.

LOCTITE 609 develops fixture strength in approximately 15 minutes under the manufacturer's stated test conditions, supporting efficient assembly and maintenance workflows.

The cured retaining compound provides a published steel shear strength of approximately 15.8 N/mm² (2,290 psi), delivering the high-strength retention required for suitable industrial components.

LOCTITE 609 can also be used to augment conventional press fits, helping strengthen the connection between mating cylindrical components.

Typical manufacturer applications include rotor-to-shaft assemblies in fractional and sub-fractional horsepower electric motors, as well as bushings, sleeves and similar cylindrical components.

The formulation is green and fluoresces under UV light, providing an additional quality-control feature that can assist with checking product presence during manufacturing and assembly processes.

With an operating temperature range of approximately -55°C to +150°C, LOCTITE 609 is suitable for a broad range of industrial, mechanical, automotive and maintenance environments.

Supplied in a convenient 50mL bottle, the product is suitable for workshops, maintenance departments, engineering facilities, electric motor repair businesses and manufacturing operations requiring dependable cylindrical-component retention.

This listing is supplied as 1 × 50mL bottle of LOCTITE 609 Retaining Compound, IDH 232100.

As an Indigenous-owned industrial supplier and procurement partner, Supply Solutions Group provides genuine LOCTITE retaining compounds, threadlockers, thread sealants, gasket products, adhesives and industrial maintenance consumables backed by responsive customer service, procurement support and Australia-wide business supply capability.

Product Type

• Product Type: Retaining Compound

• Brand: LOCTITE®

• Manufacturer: Henkel

• Product: LOCTITE 609

• IDH: 232100

• Container Size: 50mL

• Container Type: Bottle

• Technology: Acrylate

• Cure Type: Anaerobic

• Strength: High

• Viscosity: Low

• Colour: Green

• Viscosity Rating: 120 mPa·s

• Gap Fill: Up to 0.15mm

• Fixture Time: Approx. 15 Minutes

• Shear Strength on Steel: 15.8 N/mm²

• Operating Temperature: -55°C to +150°C

• Primary Application: Close-Fitting Cylindrical Metal Parts

• Best For: Bushings, Sleeves, Shafts & Press Fits

• Pack Quantity: 1 × 50mL Bottle

• Delivery: Business Delivery Available

Key Features

• Genuine LOCTITE® retaining compound

• LOCTITE 609

• 50mL bottle

• IDH 232100

• General-purpose retaining compound

• High-strength formulation

• Low-viscosity formulation

• One-part product

• No mixing required

• Anaerobic cure technology

• Designed for cylindrical fitting parts

• Suitable for close-fitting metal components

• Ideal for bushings

• Ideal for sleeves

• Suitable for shafts

• Suitable for housings

• Augments press fits

• Helps retain cylindrical components

• Provides a high-strength bond

• Provides a corrosion-free bond

• Gap fill up to 0.15mm

• Approx. 15-minute fixture time

• 15.8 N/mm² steel shear strength

• 120 mPa·s viscosity

• Green colour

• Fluorescent under UV light

• Useful for quality-control inspection

• -55°C to +150°C operating range

• Suitable for electric motor assemblies

• Suitable for manufacturing and maintenance

Technical Specifications

Typical Applications

• Bushings

• Sleeves

• Shafts

• Housings

• Bearings

• Close-fitting cylindrical components

• Press-fit assemblies

• Rotor-to-shaft assemblies

• Electric motor components

• Mechanical assemblies

• Industrial machinery

• Manufacturing equipment

• Machinery servicing

• Equipment repairs

• Production assembly

• Engineering maintenance

• Preventative maintenance

• Remanufacturing

• Industrial maintenance

Suitable Industries

• Manufacturing

• Engineering

• Automotive

• Electric motor repair

• Industrial maintenance

• Mining and resources

• Power generation

• Oil and gas

• Transport

• Heavy equipment

• Machinery servicing

• Remanufacturing

• Mechanical workshops

• Plant maintenance

• Equipment manufacturing

• Construction

• Infrastructure

• Trades and contracting

Why Choose LOCTITE® 609 Retaining Compound?

LOCTITE 609 provides a professional solution for high-strength retention of close-fitting cylindrical metal components.

The product is particularly useful where mechanical assemblies incorporate bushings, sleeves, shafts and other cylindrical parts that need to remain securely retained during service.

Its anaerobic cure technology allows the compound to cure when confined between close-fitting metal surfaces and isolated from air.

Once cured, LOCTITE 609 forms a high-strength, corrosion-free bond between the mating components.

The low-viscosity formulation is particularly important for close-fitting assemblies.

At approximately 120 mPa·s, LOCTITE 609 can flow effectively through narrow assembly clearances, while its published 0.15mm gap-fill capability makes it suitable for precision cylindrical applications.

The product can also be used to augment press fits, providing additional bonding and retaining performance between mechanically fitted components.

With a published steel shear strength of approximately 15.8 N/mm², LOCTITE 609 provides the high-strength performance required for demanding industrial assemblies.

The approximately 15-minute fixture time supports efficient production, repair and maintenance workflows.

LOCTITE 609 also fluoresces under UV light, allowing manufacturers and maintenance teams to use suitable UV inspection equipment to check product presence as part of applicable quality-control processes.

Its broad -55°C to +150°C operating temperature range further supports use across demanding mechanical and industrial environments.

Why Buy from Supply Solutions Group?

Supply Solutions Group is an Indigenous-owned Australian supplier of industrial adhesives, retaining compounds, sealants, maintenance chemicals, PPE and industrial consumables, providing genuine LOCTITE products backed by procurement support and Australia-wide business supply capability.

Benefits of Partnering with Supply Solutions Group

• Australia-wide business supply capability

• Indigenous-owned and operated business

• Genuine LOCTITE products

• Henkel industrial product supply

• Retaining compound sourcing

• Industrial adhesive supply

• Engineering maintenance consumables

• Procurement support services

• Trade account options

• Bulk purchasing solutions

• Workshop consumable supply

• Maintenance chemical sourcing

• PPE and industrial products

• Product sourcing assistance

• Responsive customer service

• Ongoing commercial supply arrangements

Frequently Asked Questions

What is LOCTITE 609?
LOCTITE 609 is a one-part, high-strength, low-viscosity anaerobic retaining compound designed for bonding close-fitting cylindrical metal parts.

How much product is included?
This listing contains 1 × 50mL bottle of LOCTITE 609.

What is the IDH for the 50mL bottle?
Henkel lists the 50mL LOCTITE 609 bottle under IDH 232100.

What colour is LOCTITE 609?
LOCTITE 609 is green.

What is LOCTITE 609 used for?
It is designed for retaining and bonding close-fitting cylindrical metal parts, including bushings, sleeves, shafts and similar assemblies.

Can LOCTITE 609 be used on bushings?
Yes. Henkel specifically identifies locking bushings in housings and on shafts as an application for LOCTITE 609.

Can it be used on sleeves?
Yes. LOCTITE 609 is suitable for retaining sleeves in housings and on shafts.

Can LOCTITE 609 augment a press fit?
Yes. Henkel specifically identifies augmenting press fits as one of the product's applications.

Is LOCTITE 609 high strength?
Yes. It is classified by Henkel as a high-strength retaining compound.

Is LOCTITE 609 low viscosity?
Yes. Henkel specifies a viscosity of approximately 120 mPa·s, making it a low-viscosity retaining compound.

What is the maximum gap fill?
Henkel specifies a gap fill of approximately 0.15mm.

What is the fixture time?
The published fixture time is approximately 15 minutes under the manufacturer's specified test conditions.

What is the shear strength?
Henkel specifies a shear strength on steel of approximately 15.8 N/mm² (2,290 psi).

What is the operating temperature range?
LOCTITE 609 has a published operating range of approximately -55°C to +150°C.

How does LOCTITE 609 cure?
It uses anaerobic cure technology, curing in the absence of air when confined between close-fitting metal surfaces.

Does LOCTITE 609 require mixing?
No. It is a single-component / one-part retaining compound.

Does LOCTITE 609 fluoresce under UV light?
Yes. LOCTITE 609 fluoresces under UV light, which can assist with applicable quality-control inspection processes.

Can it be used for electric motor repairs?
Yes. Henkel identifies rotor-to-shaft assemblies in fractional and sub-fractional horsepower motors as a typical application.

Is LOCTITE 609 suitable for loose-fitting parts?
LOCTITE 609 is primarily designed for close-fitting cylindrical parts with gap fill up to approximately 0.15mm. For larger clearances, another LOCTITE retaining compound may be more appropriate.

What surfaces is LOCTITE 609 recommended for?
Henkel recommends LOCTITE 609 for metal components.

Can Supply Solutions Group provide larger quantities of LOCTITE 609?
Yes. Bulk and ongoing supply arrangements are available for manufacturers, engineering companies, electric motor repair businesses, mining operations, maintenance departments and other commercial customers.

Can Supply Solutions Group supply other LOCTITE retaining compounds?
Yes. Supply Solutions Group can assist with broader requirements for LOCTITE retaining compounds, threadlockers, thread sealants, gasket sealants, instant adhesives and other industrial bonding products.