Klingspor KM 613 Spindle Flap Wheel 80 Grit | 60 x 30 x 6mm | 13052 | Box of 5

Professional P80 Aluminium Oxide Mounted Flap Wheels for Stainless Steel, Metal, Wood and Plastic Finishing

Supply Solutions Group supplies Klingspor KM 613 Spindle Flap Wheels – 80 Grit – 60mm x 30mm x 6mm – Box of 5 (13052) for fabrication, engineering, mining, construction, manufacturing, maintenance and professional workshop applications throughout Australia.

The Klingspor KM 613 is a spindle-mounted abrasive flap wheel designed for finishing and controlled material removal on stainless steel, general metal, wood and plastic. Its flexible flap construction makes it particularly useful for contoured components, complex shapes and areas that are difficult to reach using conventional abrasive discs. (Gasweld)

Klingspor’s current technical data confirms catalogue number:

13052

as the:

60mm Diameter x 30mm Width x 6mm Shaft – P80 Grit

KM 613, with a maximum operating speed of:

12,700 RPM

and a maximum peripheral speed of:

40m/s. (Klingspor)

The wheel uses LS 309 X coated abrasive, with:

Aluminium Oxide Abrasive Grain

and a:

Resin Bond. (Gasweld)

The moving abrasive flaps provide additional ventilation during use, helping support cooler grinding and a consistent removal rate. This makes the KM 613 particularly useful for finishing stainless steel while also providing versatility across other materials. (Gasweld)

The P80 grit offers a useful balance between stock removal and surface refinement, making it appropriate for:

• Surface blending

• Deburring

• Edge refinement

• Removing moderate grinding marks

• Finishing fabricated components

• Preparing surfaces for subsequent coating or finer abrasive work

This Supply Solutions Group listing contains:

1 Box x 5 Klingspor KM 613 P80 Spindle Flap Wheels – 60 x 30 x 6mm – 13052. Current marketplace listings confirm the Supply Solutions Group Box of 5 configuration. (mydeal.com.au)

As an Indigenous-owned industrial supplier and procurement partner, Supply Solutions Group provides Klingspor abrasives, spindle flap wheels, flap discs, cutting wheels, grinding discs, sanding products, PPE and industrial consumables backed by responsive customer service, procurement support and Australia-wide business supply capability.

Product Type

• Product Type: Spindle-Mounted Flap Wheel / Abrasive Mop

• Brand: Klingspor

• Series: KM 613

• Catalogue Number: 13052

• Abrasive Type: LS 309 X

• Abrasive Grain: Aluminium Oxide

• Bond: Resin

• Grit: P80 / 80 Grit

• Diameter: 60mm

• Width: 30mm

• Shaft Diameter: 6mm

• Maximum Speed: 12,700 RPM

• Maximum Peripheral Speed: 40m/s

• Suitable Materials: Stainless Steel, Metal, Wood & Plastic

• Manufacturer Packing Unit: 10 Wheels

• Supply Solutions Group Pack Quantity: 5 Wheels

Key Features

• Genuine Klingspor abrasive product

• KM 613 mounted flap wheel

• Catalogue number 13052

• P80 grit

• 60mm working diameter

• 30mm working width

• 6mm spindle / shaft

• LS 309 X coated abrasive

• Aluminium oxide abrasive grain

• Resin bond

• Flexible abrasive flap construction

• Constant removal rate

• Helps promote cooler grinding

• Suitable for hard-to-reach areas

• Suitable for complex shapes and contours

• Useful for finishing

• Useful for deburring

• Useful for surface blending

• Suitable for stainless steel

• Suitable for general metal

• Suitable for wood

• Suitable for plastic

• Maximum 12,700 RPM

• Maximum peripheral speed 40m/s

• Supply Solutions Group Box of 5

Technical Specifications

Specification	Details
Brand	Klingspor
Product	Spindle-Mounted Flap Wheel
Series	KM 613
Catalogue Number	13052
Abrasive Type	LS 309 X
Abrasive Grain	Aluminium Oxide
Bond	Resin
Grit	P80
Diameter	60mm
Width	30mm
Shaft Diameter	6mm
Maximum Peripheral Speed	40m/s
Maximum RPM	12,700 RPM
Stainless Steel	Suitable
General Metal	Suitable
Wood	Suitable
Plastic	Suitable
Manufacturer Packing Unit	10 Wheels
Supply Solutions Group Pack	5 Wheels

Klingspor’s current technical sheet specifically confirms 13052 = 60 x 30 x 6mm, P80, 40m/s, 12,700 RPM, with 10 wheels per manufacturer packing unit. (Klingspor)

Packaging note: the standard Klingspor manufacturer pack is 10 wheels, while this Supply Solutions Group listing is specifically supplied as a Box of 5. (mydeal.com.au)

Typical Applications

• Stainless-steel finishing

• General metal finishing

• Surface blending

• Deburring

• Edge refinement

• Weld-area finishing

• Removing moderate grinding marks

• Preparing surfaces for coating

• Contour sanding

• Internal surface processing

• Difficult-to-reach areas

• Complex fabricated components

• Wood sanding

• Plastic finishing

• General workshop maintenance

• Fabrication finishing

Suitable Industries

• Welding and fabrication

• Engineering

• Mining and resources

• Construction

• Manufacturing

• Stainless-steel fabrication

• General metalworking

• Industrial maintenance

• Automotive

• Transport

• Infrastructure

• Utilities

• Mechanical workshops

• Woodworking

• Trades and contracting

Why Choose the Klingspor KM 613 60 x 30mm?

The KM 613 provides a practical solution where a conventional flap disc or rigid abrasive wheel may not conform effectively to the workpiece.

Its:

60mm Diameter x 30mm Width

provides a larger working surface than smaller mounted flap wheels while retaining the flexibility and accessibility of a spindle-mounted abrasive.

The integrated:

6mm Shaft

allows it to be used with compatible power tools capable of operating within its speed rating.

Aluminium Oxide Abrasive Grain

Catalogue number 13052 uses:

Aluminium Oxide

abrasive grain. (Gasweld)

Aluminium oxide is a versatile abrasive material suited to a wide variety of sanding and finishing applications.

For the KM 613, Klingspor identifies suitable materials including:

• Stainless steel

• Metals

• Wood

• Plastic. (Klingspor)

LS 309 X Coated Abrasive

The abrasive flaps use:

LS 309 X

coated abrasive. (Gasweld)

This abrasive material forms the working flaps around the wheel and progressively exposes fresh abrasive as it wears.

Resin Bond

The abrasive grain is bonded using:

Resin. (Gasweld)

The resin bond forms part of the abrasive cloth construction and supports reliable performance during appropriate grinding and finishing operations.

P80 Grit

This model uses:

P80 Grit

P80 is a medium abrasive grade that provides a balance between material removal and surface refinement.

Typical uses include:

• Removing moderate surface marks

• Blending welded areas

• Deburring edges

• Refining components after coarser abrasive work

• Preparing surfaces for finer finishing

Compared with P60, P80 leaves a finer scratch pattern.

Compared with P120, P80 removes material more aggressively.

60mm Diameter

The working diameter is:

60mm

which provides increased contact area compared with the smaller 40mm KM 613 variants while remaining compact enough for many detailed and internal applications.

30mm Working Width

The wheel provides a:

30mm Working Width

which is useful when processing larger contact areas while retaining the flexibility of a flap-wheel construction.

6mm Shaft

The KM 613 uses an integrated:

6mm Shaft

for mounting in a compatible machine.

Always confirm:

• Chuck compatibility

• Shaft security

• Tool speed

• Abrasive condition

before operation.

Flexible Flap Construction

The individual abrasive flaps flex as the wheel rotates and contacts the workpiece.

This enables the wheel to conform to:

• Contours

• Curved parts

• Complex shapes

• Internal surfaces

• Recessed components

Klingspor identifies the KM 613 as particularly suited to hard-to-reach areas. (Klingspor)

Cooler Grinding

The moving flaps provide additional ventilation during operation.

This helps promote:

Cooler Grinding

and can reduce unwanted heat effects on the workpiece compared with a less ventilated abrasive format. (Gasweld)

This is especially valuable for stainless-steel finishing where excessive heat can cause unwanted surface discolouration.

Constant Removal Rate

Klingspor describes the KM 613 as providing an:

Even / Constant Removal Rate. (Gasweld)

As the flaps wear, new abrasive is progressively exposed, helping maintain useful abrasive action throughout the wheel’s service life.

Stainless Steel Applications

The KM 613 is suitable for:

Stainless Steel. (Gasweld)

Typical applications include:

• Surface finishing

• Weld blending

• Edge refinement

• Contoured component finishing

• Fabrication clean-up

Where stainless-steel contamination control is critical, maintain dedicated abrasives and tools according to workplace fabrication procedures.

General Metal Applications

Klingspor also identifies the KM 613 for:

General Metal

applications. (Klingspor)

The P80 version is especially useful for intermediate finishing where aggressive stock removal is not the primary goal.

Wood Applications

The KM 613 can also be used for:

Wood. (Gasweld)

The flexible flap arrangement can conform well to shaped timber and contoured woodworking components.

Plastic Applications

Klingspor additionally lists:

Plastic

as an application. (Gasweld)

When finishing plastic, tool speed, contact pressure and heat generation should be carefully controlled for the specific material.

Difficult-to-Reach Areas

One of the main benefits of the KM 613 design is access.

The shaft-mounted abrasive is useful for:

• Internal corners

• Recesses

• Curved components

• Fabricated assemblies

• Narrow access areas

• Irregular workpieces

The flexible flap structure further improves conformity to complex surfaces.

Maximum 12,700 RPM

For catalogue number 13052, Klingspor specifies:

Maximum Speed: 12,700 RPM

and:

Maximum Peripheral Speed: 40m/s. (Klingspor)

Never exceed these ratings.

The power tool’s operating speed must remain within the permitted limits of the mounted abrasive.

Box of 5

This Supply Solutions Group configuration contains:

5 x Klingspor KM 613 P80 Spindle Flap Wheels – 13052. (mydeal.com.au)

This smaller commercial pack is practical for:

• Fabrication workshops

• Maintenance crews

• Engineering departments

• Mobile trades

• Site stores

• Moderate-consumption users

Manufacturer Pack vs Supply Solutions Group Pack

Klingspor lists the standard manufacturer packing quantity as:

10 Wheels

for catalogue number 13052. (Klingspor)

Supply Solutions Group offers this listing as:

Box of 5

providing a smaller procurement option for customers who do not require the full manufacturer quantity. (mydeal.com.au)

Related KM 613 Grits

Klingspor’s current 60 x 30 x 6mm KM 613 range includes several grit sizes, including:

• P40 – 13050

• P60 – 13051

• P80 – 13052

• P100 – 13053

• P120 – 13054

• P150 – 13055

• P180 – 13056

• P240 – 13057

• P320 – 13058. (Klingspor)

This allows users to select the abrasive grade according to the desired balance between stock removal and surface finish.

Safety Considerations

Powered abrasive finishing can generate:

• Abrasive particles

• Workpiece debris

• Dust

• Noise

• Heat

Appropriate PPE should be selected according to the material and task.

This may include:

• Safety glasses or goggles

• Face protection

• Hearing protection

• Suitable gloves

• Protective clothing

• Respiratory protection where required

Always follow Klingspor’s abrasive safety requirements and the power-tool manufacturer’s instructions.

Storage & Handling

For best abrasive condition:

• Store in a clean, dry location

• Protect from excessive moisture

• Avoid excessive heat

• Prevent damage to the abrasive flaps

• Protect the 6mm spindle from bending

• Inspect before use

• Do not use damaged abrasive products

• Keep packaged appropriately until required

Why Buy from Supply Solutions Group?

Supply Solutions Group supplies professional abrasives, fabrication products, PPE and industrial consumables to organisations throughout Australia.

Benefits of Partnering with Supply Solutions Group

• Australia-wide business supply capability

• Indigenous-owned business

• Klingspor abrasives

• KM 613 spindle flap wheels

• Mounted abrasive wheels

• Flap discs

• Cutting discs

• Grinding discs

• Sanding products

• Surface-conditioning products

• Welding consumables

• Fabrication supplies

• Straight-grinder accessories

• Safety eyewear

• Face protection

• Hearing protection

• Respiratory PPE

• Mining consumables

• Construction supplies

• Manufacturing supplies

• Industrial consumables

• Procurement consolidation

• Trade account options

• Bulk purchasing solutions

• Product sourcing assistance

• Responsive customer service

• Recurring commercial supply arrangements

Frequently Asked Questions

What is Klingspor 13052?
It is the Klingspor KM 613 P80 spindle-mounted flap wheel measuring 60 x 30 x 6mm. (Klingspor)

What grit is catalogue number 13052?
P80 / 80 grit.

What are the dimensions?
60mm diameter x 30mm width x 6mm shaft. (Klingspor)

What abrasive grain does it use?
Aluminium oxide. (Gasweld)

What coated abrasive does it use?
The KM 613 is specified with LS 309 X abrasive cloth. (Gasweld)

What type of bond does it use?
Resin. (Gasweld)

Is it suitable for stainless steel?
Yes. (Klingspor)

Is it suitable for general metal?
Yes. (Klingspor)

Can it be used on wood?
Yes. (Klingspor)

Can it be used on plastic?
Yes. (Klingspor)

Is P80 suitable for finishing?
Yes. P80 provides a useful balance of controlled material removal and surface refinement.

Is it suitable for difficult-to-reach areas?
Yes. Klingspor specifically identifies the KM 613 as suitable for hard-to-reach areas. (Klingspor)

Why does the flap design help with heat?
The moving flaps allow additional airflow during operation, supporting cooler grinding. (Gasweld)

What is the maximum operating speed?
12,700 RPM / 40m/s. (Klingspor)

What size spindle does it have?
6mm.

How many wheels are supplied in this listing?
This Supply Solutions Group configuration contains 5 wheels. (mydeal.com.au)

What is Klingspor’s standard manufacturer packing quantity?
Klingspor lists 10 wheels per packing unit for 13052. (Klingspor)

Why is this listing a box of 5?
Supply Solutions Group offers this product in a smaller 5-wheel configuration, despite the standard manufacturer packing unit being 10. (mydeal.com.au)

What other grits are available in the 60 x 30 x 6mm KM 613 range?
Klingspor’s current range includes P40, P60, P80, P100, P120, P150, P180, P240 and P320 in this size. (Klingspor)

Can Supply Solutions Group provide other Klingspor abrasive products?
Yes. Supply Solutions Group can assist with spindle flap wheels, flap discs, cutting wheels, grinding discs and other professional Klingspor abrasive products.

Can Supply Solutions Group provide bulk or recurring quantities?
Yes. Bulk and recurring supply arrangements are available for fabricators, manufacturers, mine sites, construction businesses, engineering workshops and industrial maintenance operations.