CRC® 808 Silicone Spray | 330g Aerosol | Pack of 3 | 3055 | Multi-Purpose Lubricant & Protectant | Business Delivery Only

Clear Multi-Purpose Silicone Lubricant for Rubber, Plastic, Metal, Nylon and Wood

Supply Solutions Group supplies CRC® 808 Silicone Spray – 330g (Product Code 3055) in a convenient pack of 3 aerosol cans to organisations operating across manufacturing, engineering, automotive, transport, construction, maintenance, warehousing and industrial workplaces throughout Australia.

CRC 808 Silicone Spray is a versatile multi-purpose silicone lubricant formulated to lubricate, waterproof and protect a broad range of compatible materials and components.

The non-corrosive formulation produces a thin, durable, clear and odourless film that lubricates and protects while helping eliminate squeaking and binding caused by friction.

CRC recommends 808 Silicone for compatible rubber, plastic, metal, nylon and wood, providing workshops and maintenance teams with a highly versatile product for both mechanical components and surface-care applications.

The silicone film helps reduce friction, wear and noise, supporting smoother movement and helping protect suitable moving parts and surfaces.

CRC 808 Silicone also resists moisture, making it useful for appropriate applications where components require both lubrication and additional protection from moisture exposure.

Its clear and non-staining characteristics are particularly useful where a visible grease or coloured lubricant would be undesirable.

CRC recommends the product for restoring, protecting and preserving components including rubber mats, mountings, seals, vinyl tops, weather stripping, dashboards, door mouldings and plastic parts.

For mechanical and general maintenance applications, CRC identifies uses including tools, hoists, jacks, locks, latches, switches, controls, zippers and pulleys.

CRC 808 Silicone Spray is also an excellent mould-release agent, with manufacturer applications including mould release for plastics, composites and similar compatible processes.

The convenient 330g aerosol format allows the silicone lubricant to be applied directly to suitable surfaces and components, making it practical for workshops, maintenance stores, service vehicles and industrial facilities.

CRC lists the product as a clear, water-white liquid with a specific gravity of approximately 0.87 and a flash point of approximately -17°C.

This Supply Solutions Group listing contains a Pack of 3 × 330g CRC 808 Silicone Spray aerosol cans, providing a practical commercial quantity for organisations with regular lubrication and maintenance requirements.

As this product is supplied as a highly flammable aerosol and is subject to applicable transport and handling requirements, this listing is offered on a Business Delivery Only basis to eligible commercial addresses.

As an Indigenous-owned industrial supplier and procurement partner, Supply Solutions Group provides CRC lubricants, silicone sprays, maintenance chemicals, cleaners, workshop aerosols, PPE and industrial consumables backed by responsive customer service, procurement support and Australia-wide business supply capability.

Product Type

• Product Type: Multi-Purpose Silicone Spray

• Brand: CRC®

• Product: 808 Silicone Spray

• Product Code: 3055

• Product Size: 330g

• Container Type: Aerosol

• Pack Quantity: 3 × 330g Cans

• Appearance: Clear, Water-White Liquid

• Film: Thin, Durable & Clear

• Odour After Application: Odourless Film

• Non-Staining: Yes

• Non-Corrosive: Yes

• Moisture Resistant: Yes

• Specific Gravity: 0.87

• Flash Point: Approx. -17°C

• Primary Functions: Lubrication, Waterproofing & Protection

• Suitable Materials: Rubber, Plastic, Metal, Nylon & Wood

• Mould Release: Yes

• Delivery: Business Delivery Only

Key Features

• Genuine CRC® industrial product

• CRC 808 Silicone Spray

• Product Code 3055

• 330g aerosol cans

• Pack of 3

• Multi-purpose silicone lubricant

• Non-corrosive formulation

• Lubricates compatible components

• Waterproofs suitable surfaces

• Protects compatible surfaces

• Forms a thin protective film

• Durable silicone film

• Clear film

• Non-staining

• Odourless film

• Resists moisture

• Helps reduce friction

• Helps reduce wear

• Helps reduce noise

• Helps eliminate squeaking

• Helps eliminate binding caused by friction

• Suitable for rubber

• Suitable for plastic

• Suitable for metal

• Suitable for nylon

• Suitable for wood

• Protects and preserves compatible rubber components

• Suitable for tools

• Suitable for hoists and jacks

• Suitable for locks and latches

• Suitable for switches and controls

• Suitable for pulleys

• Excellent mould-release agent

• Suitable for plastics and composite mould release

• Convenient aerosol application

• Business Delivery Only

Technical Specifications

Typical Applications

• Rubber components

• Plastic components

• Metal components

• Nylon components

• Compatible wood surfaces

• Rubber mats

• Rubber mountings

• Rubber seals

• Vinyl tops

• Weather stripping

• Dashboards

• Door mouldings

• Plastic parts

• Tools

• Hoists

• Jacks

• Locks

• Latches

• Switches

• Controls

• Zippers

• Pulleys

• Garage-door components

• Mould-release applications

• Plastic moulding

• Composite moulding

• General workshop lubrication

• Preventative maintenance

Suitable Industries

• Manufacturing

• Engineering

• Automotive

• Transport and logistics

• Construction

• Mining and resources

• Industrial maintenance

• Mechanical workshops

• Machinery servicing

• Warehousing

• Facilities management

• Equipment manufacturing

• Agriculture

• Infrastructure

• Utilities

• Plant maintenance

• Fabrication

• Trades and contracting

Why Choose CRC® 808 Silicone Spray?

CRC 808 Silicone Spray provides a versatile combination of lubrication, waterproofing and protection across a broad range of compatible materials.

Unlike lubricants intended primarily for metal-to-metal applications, CRC 808 Silicone can be used on suitable rubber, plastic, metal, nylon and wood, making it particularly useful as a general maintenance product.

Its non-corrosive formula creates a thin, durable, clear and odourless protective film.

The clear and non-staining characteristics make CRC 808 Silicone useful where a visible oily or greasy residue would be undesirable.

The silicone film helps reduce friction and wear, while also helping eliminate squeaking, binding and unwanted noise caused by friction.

This makes the product useful for appropriate moving mechanisms such as locks, latches, pulleys, controls, tools, hoists and jacks.

CRC also specifies the product for restoring, protecting and preserving rubber and plastic components, including rubber mats, mountings, seals, weather stripping, dashboards and door mouldings.

Its ability to resist moisture adds further versatility, particularly for components and surfaces exposed to damp operating environments.

Another important application is mould release.

CRC describes 808 Silicone as an excellent mould-release product suitable for appropriate plastics, composites and similar applications.

For workshops, maintenance departments and industrial businesses requiring one silicone spray across numerous appropriate surfaces and components, CRC 808 provides a practical and versatile maintenance solution.

Mould Release Applications

CRC 808 Silicone Spray can be used as a mould-release agent for appropriate:

• Plastic components

• Composite components

• Moulding operations

• Manufacturing processes

• Production tooling

Always confirm that silicone contamination will not interfere with subsequent manufacturing processes such as painting, coating, bonding or adhesive application.

Important Application Considerations

CRC 808 Silicone should be used according to the current product label and Technical Data Sheet.

Before application:

• Ensure the material is compatible with silicone lubricant

• Clean excessive contamination from the surface where required

• Apply only the amount of lubricant necessary

• Avoid unnecessary overspray

• Provide adequate ventilation

• Keep the aerosol away from ignition sources

• Test on an inconspicuous area where surface compatibility is uncertain

Because silicone can interfere with some painting, coating, adhesive bonding and finishing processes, avoid contamination of surfaces that will subsequently undergo these operations unless compatibility has been confirmed.

For garage-door and similar moving-component maintenance, apply silicone lubricant sparingly to the components requiring lubrication rather than excessively coating surrounding surfaces.

Important Safety Information

CRC 808 Silicone Spray is supplied as a highly/extremely flammable aerosol.

The product has a published flash point of approximately -17°C, and the Technical Data Sheet specifies precautions appropriate to an extremely flammable aerosol.

Users should always:

• Read the current product label and Safety Data Sheet before use

• Keep away from heat, sparks, open flames and hot surfaces

• Do not smoke during application

• Do not spray onto an open flame or other ignition source

• Use only outdoors or in a well-ventilated area

• Avoid breathing vapour and aerosol spray

• Use appropriate PPE identified by the SDS and workplace risk assessment

• Do not puncture or incinerate aerosol cans

• Do not store aerosol cans above 50°C

• Protect cans from direct sunlight and heat sources

• Keep aerosol cans away from live electrical sources

• Follow applicable workplace chemical-storage procedures

• Dispose of containers according to applicable requirements

Because this product is a flammable aerosol subject to transport and handling requirements, this Supply Solutions Group listing is supplied on a Business Delivery Only basis.

Why Buy from Supply Solutions Group?

Supply Solutions Group is an Indigenous-owned Australian supplier of industrial lubricants, silicone sprays, maintenance chemicals, workshop aerosols, PPE and industrial consumables, providing CRC products backed by procurement support and Australia-wide business supply capability.

Benefits of Partnering with Supply Solutions Group

• Australia-wide business supply capability

• Indigenous-owned and operated business

• Genuine CRC product supply

• Silicone lubricant sourcing

• Workshop aerosol supply

• Industrial maintenance chemicals

• Automotive maintenance consumables

• Engineering supplies

• Manufacturing consumables

• Procurement support services

• Trade account options

• Bulk purchasing solutions

• Maintenance product sourcing

• PPE and industrial product supply

• Product sourcing assistance

• Responsive customer service

• Ongoing commercial supply arrangements

Frequently Asked Questions

What is CRC 808 Silicone Spray?
CRC 808 Silicone is a multi-purpose silicone spray designed to lubricate, waterproof and protect a variety of compatible materials and components.

What is the CRC product code?
The product code is 3055.

How much product is supplied?
This listing contains 3 × 330g aerosol cans, providing a total nominal product weight of 990g.

What surfaces can CRC 808 Silicone be used on?
CRC recommends the product for compatible rubber, plastic, metal, nylon and wood.

Does CRC 808 Silicone leave a clear film?
Yes. It forms a thin, durable and clear silicone film.

Is the film non-staining?
Yes. CRC identifies 808 Silicone as clear and non-staining.

Is the film odourless?
Yes. CRC describes the silicone film as odourless.

Is CRC 808 Silicone non-corrosive?
Yes. CRC describes the product as having a non-corrosive formula.

Does CRC 808 Silicone resist moisture?
Yes. Moisture resistance is one of CRC's stated product benefits.

Does it reduce friction?
Yes. CRC states that the silicone spray reduces friction.

Can it help reduce wear?
Yes. CRC identifies reduced wear as another product benefit.

Can CRC 808 Silicone stop squeaking?
It is formulated to help eliminate squeaking and binding caused by friction.

Does it help reduce noise?
Yes. CRC specifically lists reduced noise among the product's benefits.

Can it be used on rubber seals?
Yes. CRC identifies rubber seals and mountings among the recommended applications.

Can it be used on weather stripping?
Yes. Weather stripping is specifically included in CRC's recommended applications.

Can it be used on plastic parts?
Yes. CRC 808 Silicone is suitable for appropriate plastic parts and components.

Can it be used on locks and latches?
Yes. CRC recommends the product for protecting and lubricating locks and latches.

Can it be used on pulleys?
Yes. Pulleys are included in CRC's listed applications.

Can it be used on hoists and jacks?
Yes. CRC identifies hoists and jacks among the recommended lubrication applications.

Can CRC 808 Silicone be used for mould release?
Yes. CRC describes 808 Silicone as an excellent mould-release product for appropriate plastics, composites and similar applications.

Can I paint over a surface treated with silicone spray?
Silicone contamination can interfere with some painting, coating and bonding processes. Surfaces intended for subsequent finishing should be protected from overspray or appropriately prepared before further processing.

Is CRC 808 Silicone flammable?
Yes. CRC identifies the product as highly/extremely flammable. Appropriate aerosol and ignition-source precautions must be followed.

What is the flash point?
CRC publishes a flash point of approximately -17°C.

Can it be sprayed around live electrical equipment?
CRC's Technical Data Sheet states that aerosol cans conduct electricity and should be kept away from live electrical sources, including battery terminals, solenoids and other electrical components.

Why is this product Business Delivery Only?
CRC 808 Silicone is a flammable aerosol subject to applicable transport and handling requirements. This Supply Solutions Group listing is therefore restricted to eligible business delivery addresses.

Can Supply Solutions Group provide larger quantities?
Yes. Bulk and ongoing supply arrangements are available for manufacturers, engineering businesses, automotive workshops, fleet operators, mining operations, maintenance contractors and other commercial customers.

Can Supply Solutions Group supply other CRC lubricants?
Yes. Supply Solutions Group can assist with broader requirements for CRC silicone sprays, 5-56 multi-purpose lubricants, penetrating products, greases, chain lubricants, corrosion inhibitors and other industrial maintenance products.