Tridon Black Cable Ties | 200mm × 5mm | Pack of 25 | CT205BKCD-25

UV-Stabilised Black Nylon Cable Ties for Cable Management, Bundling, Securing and General Industrial Applications

Supply Solutions Group supplies Tridon Black Cable Ties – 200mm × 5mm – Pack of 25 (Part Number CT205BKCD-25) to organisations operating across automotive, electrical, mining, marine, manufacturing, construction, agriculture, transport, maintenance and industrial workplaces throughout Australia.

Tridon CT205BKCD-25 Black Cable Ties are durable nylon fastening ties designed for securing, organising and bundling cables, wires and other suitable components.

Tridon lists the product commercially in its:

5mm × 200mm

cable-tie size category.

The manufacturer’s technical specification identifies the actual nominal tie width as approximately:

4.8mm

with an overall length of:

200mm

Each cable tie is manufactured in black UV-stabilised nylon, making the product suitable for a broad range of appropriate indoor and outdoor fastening applications.

UV stabilisation helps reduce degradation caused by ultraviolet exposure, making black ties particularly useful where cable management or securing tasks are exposed to sunlight.

Tridon specifies a maximum bundle diameter of approximately:

50mm

This makes the CT205BKCD-25 suitable for medium-sized cable and wire bundles.

The cable tie provides a manufacturer-specified minimum loop tensile strength of:

222N

equivalent to approximately:

22.6kgf / 50lbf

This provides reliable holding performance for appropriate cable-management, automotive, electrical and general industrial fastening tasks.

Tridon cable ties use a simple one-piece locking design.

The tail is passed through the locking head and tightened around the bundle until the required tension is achieved.

This provides fast installation without requiring complex fastening hardware.

Typical applications include:

• Cable bundling

• Wire management

• Automotive wiring

• Electrical installations

• Equipment organisation

• Workshop maintenance

• General industrial fastening

The compact 200mm length is particularly practical for smaller and medium cable bundles where longer ties would create unnecessary excess material.

The Pack of 25 configuration is useful for maintenance personnel, electricians, technicians and tradespeople who require a practical quantity without purchasing a larger 100- or 500-piece pack.

This listing contains:

25 × Tridon Black UV-Stabilised Cable Ties – 200mm × 5mm, Part Number CT205BKCD-25

As an Indigenous-owned industrial supplier and procurement partner, Supply Solutions Group provides Tridon cable ties, cable-management products, electrical consumables, automotive products, PPE and industrial supplies backed by responsive customer service, procurement support and Australia-wide business supply capability.

Product Type

• Product Type: Nylon Cable Tie

• Brand: Tridon

• Part Number: CT205BKCD-25

• Colour: Black

• Commercial Size: 5mm × 200mm

• Technical Width: Approx. 4.8mm

• Length: 200mm

• Maximum Bundle Diameter: 50mm

• Minimum Loop Tensile Strength: 222N

• Minimum Loop Tensile Strength: 22.6kgf

• Minimum Loop Tensile Strength: 50lbf

• UV Stabilised: Yes

• Primary Application: Cable & Wire Bundling

• Pack Quantity: 25

Key Features

• Genuine Tridon cable ties

• Part Number CT205BKCD-25

• Black colour

• UV-stabilised construction

• Commercial 5mm width category

• Technical width approximately 4.8mm

• 200mm overall length

• Pack of 25

• Maximum bundle diameter approximately 50mm

• Minimum loop tensile strength 222N

• Equivalent to 22.6kgf

• Equivalent to 50lbf

• Strong one-piece fastening design

• Quick manual installation

• Suitable for cable bundling

• Suitable for wire organisation

• Suitable for automotive applications

• Suitable for electrical applications

• Suitable for industrial maintenance

• Suitable for manufacturing

• Suitable for construction

• Suitable for workshops

• Suitable for marine applications

• Suitable for mining

• Suitable for agriculture

• Suitable for general fastening

• Convenient smaller retail pack

Technical Specifications

Specification Details
Brand	Tridon
Product	Black Cable Tie
Part Number	CT205BKCD-25
Product Type	Nylon Cable Tie
Colour	Black
UV Stabilised	Yes
Commercial Width	5mm
Manufacturer Technical Width	4.8mm
Length	200mm
Maximum Bundle Diameter	50mm
Minimum Loop Tensile Strength	222N
Minimum Loop Tensile Strength	22.6kgf
Minimum Loop Tensile Strength	50lbf
Primary Function	Cable & Wire Bundling
Pack Quantity	25

Typical Applications

• Cable bundling

• Wire bundling

• Cable organisation

• Electrical wiring

• Automotive wiring

• Wiring harnesses

• Equipment maintenance

• Workshop organisation

• General fastening

• Machinery maintenance

• Construction installations

• Marine cable management

• Mining maintenance

• Agricultural equipment

• Service vehicles

• Manufacturing assembly

• General industrial applications

Suitable Industries

• Automotive

• Electrical

• Mining and resources

• Marine

• Manufacturing

• Construction

• Agriculture

• Engineering

• Transport and logistics

• Industrial maintenance

• Utilities

• Infrastructure

• Mechanical workshops

• Equipment manufacturing

• Facilities management

• Trades and contracting

Why Choose Tridon Black Cable Ties?

Tridon Black Cable Ties provide a practical fastening solution for organisations requiring reliable cable management and general-purpose bundling.

Cable ties are widely used because they provide a simple method of securing cables and components without bolts, clamps or complex tooling.

The CT205BKCD-25 combines:

• 200mm length

• Approx. 4.8mm technical width

• 50mm maximum bundle diameter

• 222N minimum loop tensile strength

• UV-stabilised black construction

This makes the product suitable for many common trade and industrial fastening requirements.

200mm Length

Each cable tie measures:

200mm long

This compact length is particularly suited to:

• Cable looms

• Wiring harnesses

• Small pipe bundles

• Equipment wiring

• Workshop organisation

The size provides enough length for a maximum bundle diameter of approximately 50mm while avoiding excessive unused tail in smaller applications.

5mm Commercial Width

Tridon categorises this product as a:

5mm × 200mm cable tie

The technical width published in the Tridon catalogue is:

4.8mm

Using the 5mm description in commercial listings is therefore appropriate while the technical specification remains 4.8mm.

222N Minimum Loop Tensile Strength

Tridon specifies a minimum loop tensile strength of:

222N

equivalent to approximately:

22.6kgf / 50lbf

This rating relates to the loop strength of the cable tie under the manufacturer’s specified test conditions.

It should not be interpreted as approval for structural lifting, hoisting or safety-critical load suspension.

Maximum Bundle Diameter

The manufacturer specifies a maximum bundle diameter of:

50mm

This helps users determine whether the tie has sufficient length for the intended cable or component bundle.

Where a larger bundle is required, a longer Tridon cable tie should be selected.

UV-Stabilised Black Construction

Tridon identifies its black cable ties as:

UV Stabilised

UV stabilisation helps slow material degradation caused by exposure to ultraviolet radiation.

This makes black ties particularly suitable for appropriate:

• Outdoor cable routing

• Automotive applications

• Agricultural equipment

• Marine environments

• Construction installations

• External equipment

Actual service life will depend on exposure intensity and environmental conditions.

Cable Management

The CT205BKCD-25 can help organise wiring by grouping related cables together.

Potential benefits include:

• Neater installations

• Reduced loose wiring

• Easier servicing

• Improved cable routing

• Simpler equipment organisation

Cable ties should be installed with enough tension to hold the bundle securely without damaging cable insulation.

Automotive Applications

Tridon cable ties are widely suited to appropriate automotive maintenance and installation tasks.

Potential applications include:

• Wiring harness organisation

• Accessory wiring

• Workshop repairs

• Cable routing

• General component securing

Cable ties should be kept clear of extreme heat, sharp edges and moving components unless the installation is specifically designed for those conditions.

Electrical Applications

Electricians and maintenance technicians can use the CT205BKCD-25 for appropriate:

• Cable bundling

• Control wiring

• Low-voltage cable organisation

• Equipment wiring

• General cable management

Cable ties should not replace required cable-support or electrical-containment systems where those are specified by applicable standards.

Industrial Maintenance

The compact 25-pack is useful for maintenance departments carrying out routine:

• Equipment repair

• Cable organisation

• Wiring modifications

• Temporary securing

• Workshop maintenance

The smaller pack size helps reduce unnecessary stock where usage volumes are moderate.

Installation Guidance

For normal use:

1. Gather the required cables or components.

2. Position the cable tie around the bundle.

3. Insert the tail through the locking head.

4. Pull until the bundle is securely retained.

5. Avoid excessive tightening.

6. Trim excess tail using an appropriate cutting tool where required.

7. Ensure the trimmed edge does not present a sharp hazard.

Cable-tie installation tools can also be used where consistent tension and clean cut-off are required.

Avoid Overtightening

Excessive cable-tie tension can damage:

• Cable insulation

• Communication cables

• Flexible hoses

• Soft tubing

• Sensitive wiring

Apply only enough tension to retain the bundle securely.

Important Application Limitations

General-purpose nylon cable ties should not automatically be used for:

• Lifting

• Hoisting

• Fall protection

• Structural load support

• Safety-critical restraints

• High-temperature applications outside their rating

• Fire-rated cable-support systems unless specifically approved

Where a certified fastening system is required, use the appropriate product for that application.

Why Buy from Supply Solutions Group?

Supply Solutions Group is an Indigenous-owned Australian supplier of cable ties, cable-management products, electrical consumables, automotive products, workshop supplies, PPE and industrial products, providing Tridon products backed by procurement support and Australia-wide business supply capability.

Benefits of Partnering with Supply Solutions Group

• Australia-wide business supply capability

• Indigenous-owned and operated business

• Genuine Tridon product supply

• Nylon cable ties

• UV-stabilised cable ties

• Electrical consumables

• Cable-management products

• Automotive products

• Workshop supplies

• Mining consumables

• Manufacturing supplies

• Construction products

• Agricultural supplies

• PPE and safety products

• Procurement support services

• Trade account options

• Bulk purchasing solutions

• Product sourcing assistance

• Responsive customer service

• Ongoing commercial supply arrangements

Frequently Asked Questions

What is Tridon CT205BKCD-25?
It is a black UV-stabilised Tridon cable tie measuring 200mm long and approximately 4.8mm wide, supplied in a pack of 25.

Why is it described as 5mm wide if the specification says 4.8mm?
Tridon groups the product commercially in its 5mm cable-tie category, while its technical catalogue lists the nominal width as 4.8mm.

How long is each cable tie?
Each tie is 200mm long.

How wide is each cable tie?
The manufacturer’s technical specification is approximately 4.8mm.

How many cable ties are supplied?
This listing contains 25 cable ties.

What colour are they?
They are black.

Are these ties UV stabilised?
Yes. Tridon identifies its black cable-tie range as UV stabilised.

What is the maximum bundle diameter?
Tridon specifies approximately 50mm.

What is the minimum loop tensile strength?
The manufacturer specifies 222N.

What does 222N equal in kilograms force?
Tridon lists approximately 22.6kgf.

What is the equivalent tensile strength in pounds force?
Approximately 50lbf.

Can these cable ties be used outdoors?
Their UV-stabilised black construction makes them suitable for appropriate outdoor applications, subject to environmental conditions.

Are they suitable for automotive work?
Yes. They are suitable for appropriate automotive wiring and general fastening applications.

Are they suitable for electrical work?
Yes. They can be used for appropriate cable management and bundling applications.

Can they be used on mine sites?
Yes. They are suitable for general cable-management and maintenance applications in mining environments.

Are they suitable for marine applications?
Yes, for appropriate cable-management tasks where nylon cable ties suit the environmental conditions.

Can they be reused?
Standard locking nylon cable ties are generally treated as single-use fasteners and are usually cut off when removed.

Can they be used for lifting?
No. General cable ties should not be used for lifting, hoisting or certified load-bearing applications.

Can they be tightened very firmly around electrical cables?
Avoid excessive tension because overtightening may damage cable insulation or deform sensitive wiring.

Is a larger pack available?
Yes. Tridon also lists the CT205BKCD 100-pack and CTB205BK 500-piece bulk configuration, subject to availability.

Can Supply Solutions Group supply longer Tridon cable ties?
Yes. Supply Solutions Group can assist with other Tridon cable-tie lengths, widths, colours and pack quantities, subject to availability.

Can Supply Solutions Group provide bulk quantities?
Yes. Bulk and ongoing procurement arrangements are available for electrical contractors, manufacturers, automotive workshops, mine sites, construction businesses and other commercial customers.